Bosch outils de jardin divers Keo Manuel

Manuels PDF
218 Pages Français

Bosch outils de jardin divers Keo
English | 15
Bosch Power Tools F 016 L81 219 | (1.4.15)
Maintenance and Service
Maintenance, Cleaning and Storage
Before any work on the machine (e. g. maintenance,
changing the tool, etc.) as well as during its transport
and storage, lock the On/Off switch in the off position.
There is danger of injury when the On/Off switch is unin-
tentionally actuated.
Always remove the blade before any work on the ma-
chine.
For safe and proper working, always keep the machine
and ventilation slots clean.
Clean the saw blade holder preferably with compressed air or
a soft brush. Remove the saw blade from the power tool for
this. Ensure proper operation of the saw blade holder by ap-
plying a suitable lubricant.
Heavy contamination of the machine can lead to malfunc-
tions. Therefore, do not saw materials that produce a lot of
dust from below or overhead.
Store the power tool in a secure, dry place, out of the reach of
children.
Do not place other objects on the power tool.
After-sales Service and Application Service
www.bosch-garden.com
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Excessive vibra-
tions/noise
Power tool defective Contact Service Agent
Sawing time per bat-
tery charge too low
Blade holder area needs cleaning Hold the tool to point to the ground and start to operate
Saw blade has worn Change saw blade
Poor sawing technique see “Working Advice” (figure 8)
Battery not fully charged Recharge battery; also see “Battery Charging”
The saw blade is run-
ning slow
Battery is getting discharged Recharge battery; also see “Battery Charging”
On/Off switch is not fully pressed Fully press On/Off switch
Overloaded during operation Reduce pressing force of tool against branch
Green and red LED
flash alternately
Battery temperature is out of charging range Increase or reduce the battery temperature to within the
specified range between 0 °C and 45 °C
Red LED flashes 1x Battery voltage is too low, battery is empty Recharge battery; also see “Battery Charging”
Red LED flashes 2x Battery temperature is out of operating
range
Increase or reduce the battery temperature to within the
specified range between –15 °C and +65 °C
Red LED flashes fast
5x
Overload (jammed blade) Reduce pressing force of tool against branch
Operate tool before the blade touches the branch
Problem Possible Cause Corrective Action
OBJ_BUCH-1453-005.book Page 15 Wednesday, April 1, 2015 2:21 PM
Manuels Connexes pour Bosch outils de jardin divers Keo