Manuel De L'utilisateur Rhino Mounts Tondeuse À Gazon Db150 [1/196 Pages]

Table des Matières

Tout Développer

DB150
OPERATOR’S MANUAL
- RHINO®
To the Owner/Operator/Dealer
DEALER to CUSTOMER Pre-Delivery / Operation Instructions
- ROTARY MOWER
TABLE OF CONTENTS
- GENERAL SAFETY INSTRUCTIONS AND PRACTICES
- OPERATOR SAFETY
- CRUSHING HAZARDS
- CONNECTING OR DISCONNECTING IMPLEMENT SAFETY
- THROWN OBJECTS HAZARDS
  - 1. MARK objects that cannot removed.
  - 2. AVOID these objects when mowing.
  - 1. BLADES CAN FAIL from impact and objects can be thrown with great velocity.
  - 2. INSPECT and REPLACE any damaged blades.
  - 3. CHECK blade carrier and REPLACE if damaged.
- RUN OVER HAZARDS
- PTO ENTANGLEMENT HAZARDS
- MOWER BLADE CONTACT HAZARDS
- HIGH PRESSURE OIL LEAK HAZARD
- ELECTRICAL & FIRE HAZARDS
- TRANSPORTING HAZARDS
- HAZARDS WITH MAINTENANCE OF IMPLEMENT
- PARTS INFORMATION
- Decal Location
  - 1. 03200347 (1) REFLECT SMV
  - 2. D681 1 INSTRUCT Boom Mower Safety Booklet
  - 3. D644 1 INSTRUCT Blue Dot Decal
  - 4. D645 1 INSTRUCT Red Dot Decal
  - 5. 00776031 1 -------------- Manual Canister
  - 6. 00781398C 1 -------------- DB150 Operator’s Manual
- Decal Description
- Federal Laws and Regulations
  - SAFETY SECTION
- Features
  - 1. LIMITED WARRANTIES
  - 1.01. Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”) that the ...
  - 1.02. Manufacturer will replace for the Purchaser any part or parts found, upon examination at one of its factories, to be defective under normal use and service due to defects in material or workmanship.
  - 1.03. This limited warranty does not apply to any part of the goods which has been subjected to improper or abnormal use, negligence, alteration, modification, or accident, damaged due to lack of maintenance or use of wrong fuel, oil, or lubricants, ...
  - 1.04. Except as provided herein, no employee, agent, Dealer, or other person is authorized to give any warranties of any nature on behalf of Manufacturer.
  - 2. REMEDIES AND PROCEDURES.
  - 2.01. This limited warranty is not effective unless the Purchaser returns the Registration and Warranty Form to Manufacturer within 30 days of purchase.
  - 2.02. Purchaser claims must be made in writing to the Authorized Dealer (“Dealer”) from whom Purchaser purchased the goods or an approved Authorized Dealer (“Dealer”) within 30 days after Purchaser learns of the facts on which the claim is based
  - 2.03. Purchaser is responsible for returning the goods in question to the Dealer.
  - 2.04. If after examining the goods and/or parts in question, Manufacturer finds them to be defective under normal use and service due to defects in material or workmanship, Manufacturer will:
  - 2.05. Purchaser is responsible for any labor charges exceeding a reasonable amount as determined by Manufacturer and for returning the goods to the Dealer, whether or not the claim is approved. Purchaser is responsible for the transportation cost for...
  - 3. LIMITATION OF LIABILITY.
  - 3.01. MANUFACTURER DISCLAIMS ANY EXPRESS (EXCEPT AS SET FORTH HEREIN) AND IMPLIED WARRANTIES WITH RESPECT TO THE GOODS INCLUDING, BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  - 3.02. MANUFACTURER MAKES NO WARRANTY AS TO THE DESIGN, CAPABILITY, CAPACITY, OR SUITABILITY FOR USE OF THE GOODS.
  - 3.03. EXCEPT AS PROVIDED HEREIN, MANUFACTURER SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO PURCHASER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS, OR DAMAGE CAUSED OR ALLEGED TO BE CAUSED DIRECTLY OR INDIRECTLY BY THE GOODS INCLU...
  - 3.04. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS WARRANTY OR TRANSACTIONS UNDER THIS WARRANTY MAY BE BROUGHT MORE THAN TWO (2) YEARS AFTER THE CAUSE OF ACTION HAS OCCURRED.
  - 4. MISCELLANEOUS.
  - 4.01. Proper Venue for any lawsuits arising from or related to this limited warranty shall be only in Guadalupe County, Texas.
  - 4.02. Manufacturer may waive compliance with any of the terms of this limited warranty, but no waiver of any terms shall be deemed to be a waiver of any other term.
  - 4.03. If any provision of this limited warranty shall violate any applicable law and is held to be unenforceable, then the invalidity of such provision shall not invalidate any other provisions herein.
  - 4.04. Applicable law may provide rights and benefits to purchaser in addition to those provided herein.
    - INTRODUCTION SECTION
- General Assembly
  - 1. Prepare the area where the unit is to be assembled. The area should be on a hard concrete floor that has been swept clean of all dust and contaminants. Un-package the mower unit carefully so that the seals on the hydraulic components are not broke...
  - 2. Inspect and clean all hydraulic hoses and fittings prior to installing them onto the tractor or mower. If dirt or material is seen in any of the parts, they should be washed and cleaned thoroughly with an oil-compatible solution. Do not blow the m...
- TRACTOR PREPARATION
  - MAINFRAME ATTACHMENT
- HEAD ATTACHMENT
  - ATTACHMENT OF HYDRAULIC HOSES
  - SIDE GAUGE WHEEL (OPTIONAL)
    - ASSEMBLY SECTION
  - 1. OPERATOR REQUIREMENTS
  - 3. GETTING ON AND OFF THE TRACTOR
    - 3.1 Boarding the Tractor
    - 3.2 Dismounting the Tractor
  - 4. STARTING THE TRACTOR
  - 5. CONNECTING THE MOWER TO THE TRACTOR
    - 5.1 Connecting the Boom Mower
  - 6. SETTING THE MOWER
    - 6.1 Setting Boom Mower Height
    - 6.2 Setting Deck Pitch
  - 7. DRIVELINE ATTACHMENT
    - 7.1 Driveline Length Check
  - 8. PRE-OPERATION INSPECTION AND SERVICE
  - 9. DRIVING THE TRACTOR AND IMPLEMENT
  - 10. OPERATING THE BOOM UNIT AND ATTACHED HEAD
  - 11. DISCONNECTING THE MOWER FROM THE TRACTOR
  - 12. TRANSPORTING THE TRACTOR AND IMPLEMENT
    - 12.1 Transporting on Public Roadways
    - 12.2 Hauling the Tractor and Implement
      - OPERATION SECTION
  - HAZARDS WITH MAINTENANCE OF IMPLEMENT
PARTS INFORMATION
- LUBRICATION INFORMATION
Proper Oil Level
DRIVELINE LUBRICATION
MAIN DRIVELINE & CAT 4 SAFETY SHIELD
BLADES
BLADE SERVICING
BLADE SHARPENING
- BLADE REMOVAL
BLADE CARRIER REMOVAL
- BLADE CARRIER INSTALLATION
- Cylinder Rod Maintenance
Boom Cylinder Removal and Replacement Instructions
- 1. Clear the area of all personnel before lowering the boom mower head.
- 2. From the tractor seat with your seat belt fastened around you, Lower the boom mower head to the ground. Extend the boom to the furthest reach and lower the mower head flat on the ground. DO NOT attempt to replace the cylinders with the boom in the...
- 3. Shut off the tractor, engage the parking brake, place the tractor transmission in the park position, and remove the key before dismounting.
- 4. Allow the system to cool to room temperature before removing any hydraulic components.
- 5. Wear Safety glasses and impenetrable gloves when working with hydraulic hoses and fittings.
- 6. Release all oil pressure from the hydraulic circuit by manually stroking each valve section with the tractor engine off. Utilize the Manual Override function if the unit is equipped with an electric over hydraulic valve.
- 7. Utilize blocks, jack stands or a suitable over head hoist to support the weight of the boom section and remove pressure form the cylinder mounting pins.
- 8. Check to see that the cylinder to be replaced is not under pressure by moving the cylinder pins by hand. The pins should be loose and should slide form the pin bore easily. If the pins are tight and cannot be moved, the cylinder may be under press...
- 9. Cylinder assemblies are heavy and can fall when the pins are removed. Support the hydraulic cylinder with a suitable hoist or jack.
- 10. Slowly loosen the hydraulic connections to the cylinder. Carefully unscrew hose fitting and allow any remaining pressure to bleed off. Use Extreme Care. Oil must be cool, and the technician should stand to the side to prevent exposure to any hydr...
- 11. Cap both ends of the fitting with suitably sized metal caps.
- 12. Remove the cylinder pins starting with the ROD end cylinder pin. Make sure the cylinder is properly supported, and remove the base end cylinder pin. The cylinder may be heavy, use proper lifting techniques to lift and handle the cylinder. If need...
- 13. Measure the distance between the cylinder pin holes and extend the new cylinder the correct length prior to attempting an installation.
- 14. Install the new cylinder in place and install both cylinder pins and retaining hardware.
- 15. Remove the metal caps, and re-install the hydraulic hoses.
- 16. Check the hydraulic reservoir of the boom mower to ensure there is sufficient oil. Follow the manufactures recommendations for proper oil type and filtering techniques and requirements to add oil to the system.
- 17. Clear the area of all persons prior to starting the tractor.
- 18. Consult the Operator's Manual for instruction in regard to the proper operating procedure.
- 19. From the tractor seat, with the seat belt fastened, operate the boom to ensure proper operation of the boom function.
- 20. From the tractor seat, with the seat belt fastened, operate the boom controls to fully extend and retract the new cylinder several times to purge any trapped air from the system.
- 21. From the tractor seat, with the seat belt fastened, look for signs of and oil leak. If an oil leak is observed, shut the tractor down and follow the steps to remove pressure from the hydraulic circuit. Identify the source of the leak, and resolve...
- 22. Upon completion of the required repairs, return to Step # 16 to recheck the cylinder for proper operation.
Hydraulic Component Maintenance Schedule
- LEXAN Sheet Cleaning Recommendations
STORAGE
- PROPER TORQUE FOR FASTENERS
SERVICE OF SPINDLE HOUSING
- Removing Bearing
- Inspection
- Assembly
MOTOR & COUPLING INSTALLATION
- TAPER BUSHING & SHEAVE INSTALLATION
- START UP PROCEDURE
Front Cover Number.pdf
Front Cover SP Number.pdf
Complete Ind Ag Mower Eng-Span Online10-10.pdf
- English Cover.pdf
- Complete Ind Ag Mower Spanish 10-10.pdf
- Complete Ind Ag Mower Spanish 10-10.pdf

manuelsocean.fr

Info

Rhino Mounts tondeuse à gazon 148

Rhino Mounts tondeuse à gazon FN120

Rhino Mounts tondeuse à gazon FM100

Rhino Mounts tondeuse à gazon 1594

Rhino Mounts tondeuse à gazon SE42

Rhino Mounts tondeuse à gazon FN20

Rhino Mounts tondeuse à gazon SE8A

Rhino Mounts tondeuse à gazon TURBO 96

Rhino Mounts tondeuse à gazon FN14

Rhino Mounts tondeuse à gazon GK6072

Rhino Mounts tondeuse à gazon RHD62

Rhino Mounts tondeuse à gazon SE4

Rhino Mounts tondeuse à gazon FN180

Rhino Mounts tondeuse à gazon RHD74

Rhino Mounts tondeuse à gazon RHD88

manuelsocean.fr

Info